Parker Transair 2019

70 Ø63 Ø76 Ø100 Ø168 Ø25 Ø16,5 Ø40 Ø 50 General TRANSAIR ® ALUMINIUM PIPE APPLICATIONS PRESENTATION DEBURRED AND CHAMFERED PIPE DEBURRED AND CHAMFERED PIPE DEBURRED AND CHAMFERED PIPE PIPE PRE-DRILLED AT EACH END WITH TWO 22 MM DIAMETER HOLES, DEBURRED AND CHAMFERED PIPE LUGGED AT EACH END, DEBURRED AND CHAMFERED PIPE LUGGED AT EACH END, DEBURRED AND CHAMFERED PIPE LUGGED AT EACH END, DEBURRED AND CHAMFERED Transair ® aluminium pipe is supplied "ready for use". No particular preparation (cutting, deburring, chamfering, etc.) is required. Thanks to the rigidity of Transair ® aluminium pipe, temperature-related expansion / contrac- tion phenomena are reduced to a minimum. The Transair ® network retains its straightness, and hence its performance, over time (reduction of pressure drop caused by surface friction). Transair ® aluminium pipe is calibrated and fits perfectly with all Transair ® components. Each connection is automatically secured and the seal is optimized. The use of Transair ® aluminium pipe minimises corrosion to the internal surface (self-protection of the pipe by the formation of alumina oxide). Transair ® aluminium pipe has a protective lac- quer coating (QUALICOAT certified) and is thus protected from external aggression. Its colour allows the network to be immediately identified and gives a clean and aesthetic overall appearance. Standard colours available: • blue (RAL 5012/BS1710) • grey (RAL 7001) • green (RAL 6029) (please contact us for other colours) Transair ® aluminium pipe is available in 8 diameters and 2 lengths: 3 metres and 6 metres (4.5 metres for Ø16.5 - please contact us for other lengths). Transair ® Ø16.5 - Ø25 - Ø40 - Ø50 - Ø63 - Ø76 - Ø100 - Ø168 aluminium pipe has been specially designed for the creation of primary and secondary networks for compressed air, vacuum and inert gases (argon, nitrogen, CO 2 ) - please contact us for other fluids PIPE PRE-DRILLED AT EACH END WITH TWO 22 MM DIAMETER HOLES, DEBURRED AND CHAMFERED