Parker Transair 2019

145 Ø76 Ø100 4 1 3 2 1 2 3 4 5 6 1 - Slip the cartridge over the end of the first pipe fully up to the shoulder. 2 - Bring the second pipe to the cartridge and slide fully up to the shoulder. 3 - Position the clamp over the cartridge / pipe assembly. 4 - Hand tighten the pre-fitted screws with a 6mm Allen key. 5 - Pull the pipes fully back towards the outside of the clamp. 6 - Tighten the clamp screws as follows: - mini tightening torque: 10 N.m - maxi tightening torque: make the 2 clamps touch together 7 - For effective clamp sealing, screw tighte ning should be performed on alternate sides of the clamp as shown above. For effective clamp sealing, screw tightening should be performed on alternate sides of the clamp as shown below: To disconnect, perform the same operations in reverse order. Connection / Disconnection Installation Guide