Parker Transair 2019

141 Ø42 Ø60 Ø76 Ø100 > > > PROCEDURE Open the retaining pin at the front of the machine by pressing the jaw to release button*. Place the jaws in the housing. Lock in position by closing the retaining pin. Manually open the jaws of the clamp and insert the stainless steel pipe into the clamp as far as it will go. Release the jaws. Press the trigger and crimp the tube until a ‘snap’ sound is heard. Re-open the two jaws to remove the pipe and rotate the pipe slightly. Renew the operation until the required minimum number of lugs for each diameter is achieved 2 - PREPARATION OF THE PORTABLE TOOL KIT 3 - HOW TO CREATE THE LUGS Min. Number of Lugs IMPORTANT: DO NOT OVERLOP THE LUGS! * Installation Guide