Level 3 reduit / EN_Level 4 sans numero 80 LF 6100 Push-In Fittings 6105 Stud Fitting, Male BSPT and Taper Metric Thread Brass, NBR ØD C F1 F2 H Kg 4 M6x1 6105 04 52 13.0 11.0 16.5 0.013 M8x1 6105 04 56 13.0 11.0 14.5 0.012 M8x1.25 6105 04 57 13.0 11.0 14.5 0.012 M10x1 6105 04 60 13.0 11.0 14.5 0.015 R1/8 6105 04 10 13.0 11.0 14.5 0.014 R1/4 6105 04 13 14.0 11.0 12.5 0.018 6 M10x1 6105 06 60 17.0 14.0 16.5 0.024 R1/8 6105 06 10 17.0 14.0 17.5 0.026 R1/4 6105 06 13 17.0 14.0 16.5 0.029 8 M12x1 6105 08 65 19.0 21.0 24.0 0.041 10 M14x1.5 6105 10 71 22.0 24.0 26.0 0.005 6101 Stud Fitting, Male Parallel and Metric Thread Brass, NBR ØD C F1 F2 H Kg 4 M10x1 6101 04 60 13.0 11.0 14.0 0.014 6 M10x1 6101 06 60 17.0 14.0 17.5 0.026 M12x1 6101 06 65 17.0 14.0 16.5 0.025 6114 Stud Fitting, Female Metric Parallel Thread Brass, NBR ØD C E F1 F2 H Kg 4 M8x1 6114 04 56 8.0 13.0 11.0 25.5 0.021 6 M8x1 6114 06 56 8.0 17.0 14.0 28.5 0.043 Component Materials Technical Characteristics Dedicated to lubrication and vacuum systems, this technology secures the connection and sealing performance at high pressures. Ø metric: 4 to 10 mm Advantages • Sealing guaranteed by 3 seals • Tube cannot be disconnected without the use of a spanner • Up to 60 bar, with rigid polymer or grooved metal tubing • Compatible Fluids: Lubricants, compressed air, vacuum, other fluids and compatible gases • Working Pressure: Vacuum to 60 bar • Working Temperature: -40°C to +120°C Max./Min. Tightening Torques (daN.m) Thread M6 x1 M8 x1 M8 x1.25 M10 x1 M12 x1 M14 x1.5 R 1/8 R 1/4 Taper 0.2/ 0.6 0.2/ 1.2 0.2/ 1 0.2/ 1.2 0.2/ 2 0.5/ 1.5 0.2/ 1.0 0.5/ 1.5 Parallel - 0.6/ 1 - 0.6/ 1 1.8/ 2.2 - - - Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Use is guaranteed with a vacuum of 755 mm Hg (99% vacuum). Spring collet: brass Seals : NBR Seal: NBR Body: brass Gripping teeth or collet: brass Silicone-free Regulations • PED • RoHS • REACH 6179 Stud Elbow, Male BSPT and Taper Metric Thread Brass, NBR ØD C F G H J L Kg 4 M6x1 6179 04 52 11.0 12.5 14.5 8.0 20.0 0.017 M8x1 6179 04 56 11.0 12.5 14.5 8.0 20.0 0.018 M8x1.25 6179 04 57 11.0 12.5 15.0 8.0 20.0 0.017 M10x1 6179 04 60 11.0 12.5 15.5 8.0 20.0 0.019 R1/8 6179 04 10 11.0 12.5 15.0 8.0 20.0 0.019 R1/4 6179 04 13 11.0 12.5 17.0 10.0 20.0 0.030 6 M10x1 6179 06 60 14.0 16 18.0 10.0 25.5 0.033 M12x1 6179 06 65 14.0 16 18.0 10.0 25.5 0.032 R1/8 6179 06 10 14.0 16 18.0 10.0 25.5 0.035 R1/4 6179 06 13 14.0 16 19.0 10.0 25.5 0.036 8 M12x1 6179 08 65 17.0 19 17.5 12.0 30.0 0.054
RkJQdWJsaXNoZXIy MzYzNzg=