Level 3 reduit / EN_Level 4 sans numero 60 LF 3600 Push-In Fittings / Stud Fittings 3675 Stud Fitting, Male BSPT Thread FDA chemical Nickel-plated brass, FKM ØD C F1 F2 H Kg 4 R1/8 3675 04 10 10.0 3.0 15.0 0.009 R1/4 3675 04 13 14.0 3.0 15.0 0.017 6 R1/8 3675 06 10 13.0 4.0 17.0 0.011 R1/4 3675 06 13 14.0 4.0 17.0 0.018 8 R1/8 3675 08 10 15.0 5.0 19.0 0.015 R1/4 3675 08 13 16.0 6.0 18.0 0.019 R3/8 3675 08 17 17.0 6.0 18.5 0.027 10 R1/4 3675 10 13 18.0 7.0 23.0 0.026 R3/8 3675 10 17 18.0 8.0 22.5 0.031 R1/2 3675 10 21 22.0 8.0 22.5 0.056 12 R1/4 3675 12 13 20.0 7.0 25.5 0.033 R3/8 3675 12 17 20.0 9.0 24.0 0.035 R1/2 3675 12 21 22.0 10.0 23.0 0.051 14 R3/8 3675 14 17 22.0 9.0 27.0 0.042 R1/2 3675 14 21 24.0 11.0 26.0 0.057 3601 Stud Fitting, Male BSPP and Metric Thread FDA chemical Nickel-plated brass, FKM ØD C E F1 F2 H Kg Component Materials Technical Characteristics Made of chemical nickel-plated brass, this range of metal fittings is resistant to industrial and food fluids. Ø metric: 4 to 14 mm Advantages • Wide range of working temperatures: up to +150°C • Wide range of working pressures: from vacuum up to 30 bar • Materials conform to FDA standards • Extended chemical compatibility • Suitable Fluids: compressed air, grease, lubricant, water… • Working Pressure: vacuum to 30 bar (20 bar: 3699, 3609, 3639) • Working Temperature: -25°C to +150°C Maximum Tightening Torque (daN.m) Threads M5 x0.8 M6 x1 M8 x1 M10 x1 G1/8 G1/4 G3/8 G1/2 0.16 0.18 0.6 0.8 0.8 1.2 3 3.5 Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Use is guaranteed with a vacuum of 755 mm Hg (99% vacuum). Body: FDA chemical nickel-plated brass Adaptor: FDA chemical nickelplated brass O-ring: fluoroelastomer (FKM) Collet: FDA chemical nickelplated brass Washer: stainless steel 316L O-ring: fluoroelastomer (FKM) Silicone-free Regulations • PED • RoHS • REACH 4 M5x0,8 3601 04 19 3,5 10,0 2,5 15,5 0,006 M6x1 3601 04 52 4,5 10,0 3,0 16,0 0,006 M8x1 3601 04 56 5,0 11,0 3,0 14,5 0,007 G1/8 3601 04 10 13,0 3,0 14,5 0,009 G1/4 3601 04 13 16,0 3,0 14,5 0,015 6 M5x0,8 3601 06 19 3,5 13,0 2,5 19,0 0,010 M10x1 3601 06 60 5,5 13,0 4,0 17,5 0,011 G1/8 3601 06 10 13,0 4,0 17,5 0,011 G1/4 3601 06 13 16,0 4,0 17,0 0,015 8 G1/8 3601 08 10 16,0 5,0 21,0 0,014 G1/4 3601 08 13 16,0 6,0 18,0 0,016 G3/8 3601 08 17 20,0 6,0 19,0 0,028 10 G1/4 3601 10 13 18,0 7,0 25,0 0,025 G3/8 3601 10 17 20,0 8,0 22,5 0,028 G1/2 3601 10 21 24,0 8,0 22,5 0,043 12 G1/4 3601 12 13 20,0 7,0 26,5 0,030 G3/8 3601 12 17 20,0 9,0 26,0 0,034 G1/2 3601 12 21 24,0 10,0 23,5 0,042 14 G3/8 3601 14 17 22,0 9,0 28,0 0,038 G1/2 3601 14 21 24,0 11,0 26,5 0,045 4,5 4,5 4,5 5,5 5,5 5,5 5,5 7 7 7 5,5 5,5 5,5 5,5 5,5
RkJQdWJsaXNoZXIy MzYzNzg=