157 Compression Fittings 01 // Fittings Level 3 reduit / EN_Level 4 sans numero Spigot Fittings NStiackinelle-sPslaSttedelBCraosmspSrpeisgsoiot nFiFttitintignsgs / Complementary Fittings Component Materials Technical Characteristics Particularly suitable for flexible tubing, PL fittings allow the tubes to be disassembled and reused. Ø metric: 4 to 14 mm Advantages • Full flow sealing system • Compatible with flexible and semi-rigid tubes (polyurethane, polyamide, polyethylene, fluoropolymers, etc.) • Reliable direct sealing system without the use of a seal or olive • Nickel-plated for increased corrosion resistance • Compatible Fluids: Compressed air Other fluids: contact us • Working Pressure: Vacuum to 18 bar with BPLM-M nut Vacuum to 40 bar with BPLM nut • Working Temperature: -40°C to +100°C Tightening Torque (Nm) M5 x0.8 M6 x1 1/8 1/4 3/8 1/2 BSPT Thread 8 12 14 16 BSPP Thread with "O" ring 1.2 1.5 2.5 3.5 BSPP Thread with metal sleeve 5 8 10 12 Metric Thread 0.8 0.8 Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum). For use with fire-proof tubing: please consult us. Silicone-free Body: nickel-plated brass Nut: nickel-plated brass Cut the polymer tube square. Push the tube home into the body of the fitting. Slide the nut onto the tube. Tighten the nut by hand (in the case of soft tubing) or using a spanner (for semirigid tubing) until it comes into contact with the end stop. Cutting the Tube Preparing the Connection Connecting the Tube Final Assembly Installation F3BPL Stud Fitting, Male BSPT Thread Nickel-plated brass ØD C F F1 H Kg 2.7x4 R1/8 F3BPL2.7/4-1/8 12.0 8.0 16.0 0.009 4x6 R1/8 F3BPL4/6-1/8 12.0 12.0 19.5 0.016 R1/4 F3BPL4/6-1/4 14.0 12.0 20.0 0.025 6x8 R1/8 F3BPL6/8-1/8 12.0 14.0 19.5 0.019 R1/4 F3BPL6/8-1/4 14.0 14.0 20.0 0.026 R3/8 F3BPL6/8-3/8 17.0 14.0 20.0 0.030 8x10 R1/4 F3BPL8/10-1/4 14.0 16.0 21.5 0.031 R3/8 F3BPL8/10-3/8 17.0 16.0 21.5 0.043 10x12 R3/8 F3BPL10/12-3/8 17.0 18.0 23.0 0.036 11x14 R3/8 F3BPL11/14-3/8 22.0 22.0 23.5 0.061 Compatible with BPLM-M nut only F4BPL Stud Fitting, Male BSPP Thread Nickel-plated brass, NBR ØD C E F F1 H Kg 4x6 G1/8 F4BPL4/6-1/8 6.0 13.0 12.0 19.5 0.031 6x8 G1/4 F4BPL6/8-1/4 8.0 16.0 14.0 20.0 0.033 Compatible with BPLM-M nut only
RkJQdWJsaXNoZXIy MzYzNzg=