147 Brass Compression Fittings Compression Fittings 01 // Fittings Level 3 reduit / EN_Level 4 sans numero Brass Compression Fittings / Complementary Fittings 0126 Plug for Compression Fitting Brass ØD L Kg 4 0126 04 00 10.0 0.002 6 0126 06 00 10.0 0.003 8 0126 08 00 11.5 0.006 10 0126 10 00 13.0 0.010 12 0126 12 00 13.0 0.014 14 0126 14 00 13.5 0.020 18 0126 18 00 16.0 0.038 22 0126 22 00 18.0 0.003 The plug is used to blank off an outlet in a compression fitting, replacing the olive. When an open outlet is required, simply dismantle and replace the plug with the tube olive, reusing the nut. The plug is also reusable. 0125 Tube End Plug for Compression Fitting Brass ØD C F L L1 Kg 4 M8x1 0125 04 00 10.0 12.0 8.0 0.005 6 M10x1 0125 06 00 11.0 13.5 9.5 0.008 8 M12x1 0125 08 00 14.0 14.0 9.0 0.013 10 M16x1.5 0125 10 00 17.0 18.0 11.0 0.025 This plug enables unused tubes to be blanked off. The male thread on the plug has the same pitch as the female thread on the sleeve nut of a standard Parker Legris fitting. Therefore the plug screwed into the sleeve nut blanks off the tube. To reopen the passage, simply unscrew the plug and fit the required coupler. No further treatment of the tube is required. 0220 Hex Head Plug, Male BSPP and Metric Thread Brass, technical polymer C F G H1 Kg M5x0.8 0220 19 00 8.0 8 5.0 0.002 G1/8 0220 10 00 14.0 14 7.5 0.011 G1/4 0220 13 00 17.0 17 7.5 0.020 G3/8 0220 17 00 17.0 22 8.5 0.024 G1/2 0220 21 00 22.0 27 10.0 0.041 Thread with pre-assembled sealing washer M5: with screwdriver slot for tightening Maximum allowable working pressure = 20 bar Conforms to BNA 229 (with the exception of M5 model), BSPP thread, ISO ISO 228-1, Parallel metric thread, ISO NFE 03-054. Assembly: Barb Connectors Our barb connectors 0122 and 0165 are designed to be used with different types of hose. They are secured using the nut and olive provided with the fitting. Nut Barb Connector + Olive + 0220..39 Hex Head Plug with Bi-Material Seal, Male BSPP Thread Brass, zinc plated steel with NBR seal C F G H Kg G1/8 0220 10 00 39 14.0 14 6.5 0.012 G1/4 0220 13 00 39 17.0 17 6.5 0.020 G3/8 0220 17 00 39 17.0 22 8.0 0.025 G1/2 0220 21 00 39 22.0 26 9.0 0.042 G3/4 0220 27 00 39 22.0 32 10.0 0.059 G1 0220 34 00 39 27.0 39.5 10.5 0.088 Plug with bi-material seal Bi-material washers part number 0139 can be found in sub-chapter “Adaptors and Manifolds”. Part Number with suffix 39, maximum allowable working pressure: 250 bar 0120 Stud Standpipe, Male BSPT Thread Brass ØD C F L L1 Kg 4 R1/8 0120 04 10 11.0 25.5 14.0 0.007 5 R1/8 0120 05 10 11.0 26.0 14.5 0.007 6 R1/8 0120 06 10 11.0 26.5 15.0 0.008 R1/4 0120 06 13 14.0 31.0 15.0 0.015 8 R1/8 0120 08 10 11.0 28.5 17.0 0.009 R1/4 0120 08 13 14.0 33.0 17.0 0.016 R3/8 0120 08 17 17.0 33.5 17.0 0.020 10 R1/4 0120 10 13 14.0 36.0 20.0 0.017 R3/8 0120 10 17 17.0 36.5 20.0 0.022 R1/2 0120 10 21 22.0 41.0 20.0 0.039 12 R1/4 0120 12 13 14.0 36.0 20.0 0.017 R3/8 0120 12 17 17.0 36.5 20.0 0.022 R1/2 0120 12 21 22.0 41.0 20.0 0.040 14 R3/8 0120 14 17 17.0 38.0 21.5 0.023 R1/2 0120 14 21 22.0 42.5 21.5 0.042 15 R3/8 0120 15 17 17.0 38.0 21.5 0.023 R1/2 0120 15 21 22.0 42.5 21.5 0.040 16 R3/8 0120 16 17 17.0 39.5 23.0 0.024 R1/2 0120 16 21 22.0 44.0 23.0 0.042 18 R1/2 0120 18 21 22.0 44.5 23.5 0.042 R3/4 0120 18 27 27.0 47.5 23.5 0.070 20 R3/4 0120 20 27 27.0 49.0 25.0 0.070 22 R3/4 0120 22 27 27.0 48.5 25.5 0.067 R1 0120 22 34 36.0 52.5 25.5 0.117 28 R1 0120 28 34 36.0 57.0 30.0 0.140
RkJQdWJsaXNoZXIy MzYzNzg=