125 Pressure Regulator Fittings Function Fittings 01 // Fittings Level 3 reduit / EN_Level 4 sans numero Component Materials (7300) Technical Characteristics (7300) Pressure regulators stabilise at the maximum determined value the pressure, whatever the fluctuations of the pressure upstream. Ø metric: 4 to 10 mm Advantages • Lockable adjustment possible of the setpoint • Output pressure adjustment options marked on the screw • Installation in a manifold allows optimum output pressures to be delivered to specific parts of the circuit • Designed for applications where cylinder force needs to be controlled: marking, sleeving, crimping cylinders etc. Tightening Torque (BSPT) Thread G1/8 G1/4 G3/8 daN.m 0.4 0.5 0.6 • Compatible Fluids: Compressed air • Working Pressure: Upstream pressure: 1 to 16 bar Downstream pressure: 1 to 8 bar • Working Temperature: -10°C to +70°C Body: technical polymer Seal: nitrile Screw: nickel-plated brass Regulations • REACH • PED Silicone-free • RoHS Mounting Downstream of the Control Valve Mounting Upstream of the Control Valve Flow Characteristics at 7 bar (Nl/min) Operation Adjustment of the piston feed pressure in both directions Phase 1: adjustment of the piston speed in a single direction Phase 2: in return direction, pressure is supplied through the control valve Downstream pressure (bar) Flow (Nl/min) Downstream pressure (bar) Flow (Nl/min) Downstream pressure (bar) Flow (Nl/min) G1/4 Models G1/8 Models G3/8 Models Pressure Regulator Fittings
RkJQdWJsaXNoZXIy MzYzNzg=