Hose layline example 462 Hose DN Zoll size mm OD MPa1 psi1 MPa2 psi2 Bend weight 462-4 462TC-4 462ST-4 6 1/4 -4 6.4 13.4 42.5 6160 170.0 24640 50 0.30 462-5 462TC-5 462ST-5 8 5/16 -5 7.9 15.0 40.0 5800 160.0 23200 55 0.35 462-6 462TC-6 462ST-6 10 3/8 -6 9.5 17.2 35.0 5075 140.0 20300 65 0.42 462-8 462TC-8 462ST-8 12 1/2 -8 12.7 20.4 31.0 4495 124.0 17980 80 0.52 462-10 462TC-10 462ST-10 16 5/8 -10 15.9 23.9 28.0 4060 112.0 16240 100 0.66 462-12 462TC-12 462ST-12 19 3/4 -12 19.1 27.7 28.0 4060 112.0 16240 120 0.86 462-16 462TC-16 462ST-16 25 1 -16 25.4 35.4 21.0 3045 84.0 12180 150 1.17 462-20 462TC-20 462ST-20 31 1 1/4 -20 31.8 45.1 17.2 2495 68.8 9980 335 1.80 - 462TC-24 - 38 1 1/2 -24 38.1 52.0 14.6 2118 58.4 8472 400 2.20 - 462TC-32 - 51 2 -32 50.8 64.0 11.2 1624 44.8 6496 500 2.90 - 462TC-40 - 63 2 1/2 -40 63.5 76.0 7.0 1015 28.0 4060 760 3.00 - 462TC-48 - 76 3 -48 76.2 87.5 7.0 1015 28.0 4060 760 3.30 Part Number Hose I.D. Hose O.D. Pressure Rating max. working pressure min. burst pressure min. bend radius weight DN Inch Size mm mm MPa psi MPa psi mm kg Standard / High abrasion resistance / Extreme abrasion resistance 462 / 462TC / 462ST EVO EVO EVO EVO EVO EVO EVO 462 / 462TC / 462 ST Elite No-Skive Compact Exceeds EN 857-2SC - ISO 11237 Type 2SC • EVO improved performance from size 4 up to 16 • No-Skive hose construction – Compact design • Nitrile (NBR) inner tube – extended fluid compatibility • Exceeding EN/ISO specifications for pressure, bend radius and abrasion resistance • Also available with TC cover (MSHA and abrasion resistant) and ST cover (Superior Abrasion resistance) Primary Applications Demanding medium pressure hydraulic applications in all markets Type Approvals Please refer to our website www.parker.com/phde Applicable Specifications Exceed EN 857-2SC – ISO 11237 Type 2SC Construction Inner tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range ............ -40 °C up to +100 °C Exception: Air .................................... max. +70 °C Water ............................... max. +85 °C Recommended Fluids Hydraulic fluids on a mineral-oil basis, water-glycol and lubricating oils, air and water. For air and gas applications with a pressure exceeding 1.7 MPa, the cover must be pin-pricked. Please refer to our main catalogues CAT/4400, CAT/4405 and CAT/4460 for more detailed information. Fitting Series Size -4 up to -16 46 48 Size -20 48 The combination of high temperature and high pressure could reduce the hose life. From size -4 to -16, smooth cover, 462-20 wrapped cover Also available in reels up to size -12 under part number 462-xx-RL Extreme abrasion resistant cover MSHA approved Super Tough Cover Highly abrasion resistant MSHA approved Standard Cover Tough Cover Rubber Hoses Medium Pressure Catalogue BEST OF/UK B-6
RkJQdWJsaXNoZXIy MzYzNzg=