IH72190500/10 12.7 23.8 0.5 75 5 0.45 23 IH72190625/10 15.9 27.0 0.5 75 5 0.55 33 IH72190750/10 19.1 30.0 0.5 75 5 0.58 36 IH72191000/10 25.4 36.0 0.5 75 5 0.68 36 IH72191250/10 32.0 43.0 0.5 75 5 0.75 56 IH72191500/10 38.0 49.0 0.5 75 5 0.85 74 IH72192000/10 51.0 63.0 0.5 75 5 1.44 117 IH72192500/10 63.5 76.5 0.5 75 5 1.74 183 IH72193000/10 76.0 90.0 0.5 75 5 2.23 223 Part Number Max. Working Pressure Weight min. Bend Radius I.D. (mm) O.D. (mm) MPa psi bar kg/m mm E-Z FORM™ MP Parker Global Product Suitable for biodiesel, diesel, ethanol and gasoline in oil suction/return lines, vehicle fuel fill connector lines, drain lines on buses, cranes, mobile off-road equipment. Extremely flexible and lightweight it reduces installation times, eliminates special design, tooling and fabrication cost. Capable of being routed though confined spaces where pre-shaped and formed hose are normally required. Do not use for fuel dispensing or drag across sharp edges or very abrasive surfaces. Hose Construction Tube: Black NBR, antistatic rubber compound Reinforcement: Multiple textile plies with wire helix Cover: Black, Greek corrugated CR rubber compound resistant to oil and weathering Temperature Range ID up to 25 mm: -34°C (-30°F) to +121°C (+250 °F) all other sizes: -29°C (-20°F) to +93°C (+200°F) • Saves time and costs thanks to easy and quick assembly • Superior kink resistance, minimal force to bend, outstanding flexibility • Permanent fittings capability • Design Factor 4:1 • Vacuum: 0.9 bar Tolerances According to UNI EN ISO 1307 Please refer to our main catalogues CAT/4400, CAT/4405 and CAT/4460 for more detailed information. Crimp Specifications For currently qualified crimp specifications including coupling designation, refer to CrimpSource at www.parker.com/crimpsource-euro. SERIES 7219 E-Z FORM MP HOSE 75 PSI MAX WP Industrial Hoses Low Pressure Multipurpose & Air E-Z FORM™ MP Hose layline example Catalogue BEST OF/UK A-12
RkJQdWJsaXNoZXIy MzYzNzg=