13 1/2 -8 M8x1.25 24 5/16-18 24 19 3/4 -12 M10x1.5 50 3/8-16 43 25 1 -16 M12x1.75 92 7/16-14 70 32 1-1/4 -20 M12x1.75 130 1/2-13 105 32 1-1/4 -20 M14x2 150 - - 38 1-1/2 -24 M16x2 210.0 5/8-11 210 51 2 -32 M20x2.5 400.0 3/4-10 360 64 2-1/2 -40 M24x3 600.0 - - 76 3 -48 M30x3.5 650.0 - - 19 3/4 -12 M10x1.5 60 3/8-16 - 25 1 -16 M12x1.75 92 7/16-14 - 32 1-1/4 -20 M12x1.75 130 1/2-13 - 32 1-1/4 -20 M14x2 150 - - G Thread Assembly torque Tolerances: max. 10%; min. 0% G Thread Assembly torque Tolerances: max. 10%; min. 0% DN Inch Size metric Nm UNC (Inch) Nm G Thread Assembly torque Tolerances: max. 10%; min. 0% G Thread Assembly torque Tolerances: max. 10%; min. 0% DN Inch Size metric Nm UNC (Inch) Nm Technical handbook VIII The correct method to fit ISO 6162-2 flange • Make sure sealing surfaces are free of burrs, nicks, scratches or any contamination • Lubricate the O-ring with system fluid or compatible lubricant • Position flange and clamp halves • Place lock washers on bolts and bolt through clamp halves • Hand tighten bolts • Torque bolts in diagonal sequence in small increments to the appropriate torque level listed in chart • Tighten bolts according to chart Spanner torque values ISO 6162-2 flange ISO 6162-2 flange 8000 psi The correct method to fit ISO 6162-2 flange
RkJQdWJsaXNoZXIy MzYzNzg=