436 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS COILS WITH SCREW TERMINALS HIGH TEMPERATURE COILS 40 mm These coils can be mounted with every Parker Solenoid Valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. They can be mounted with all metal housings. The coil winding is completely encapsulated in synthetic material. Easy mounting in confined spaces. Electrical connection with screw terminals for wire up to 1.5 mm². Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive. To Order a Coil choose Coil Ref + Voltage Code, example:486265 for 24VAC/50Hz = 486265 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. These coils must be used with suitable housings, see examples below: Specification High Temperature & High Power Reference 486265 Coil Group 2.0 / 2.2 Class of insulation H 180°C Ambient temperature -40°C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) 14 W P (cold) 20°C 21 W AC Pn (holding) 14 W Attraction cold 56 VA (20 W) Weight 140 g Voltages "Un" VAC/Hz Code VDC Code -10% to +10% of the Un 24/50 110/50 220/50 230/50 A2 A5 A7 F4 12 24 48 C1 C2 C4 2.0/2.1 2.2 COIL GROUP Ref. 4270 - Protection IP 44 according to IEC / EN 60529 standard (with cable gland) Ref. 4538 - Protection IP 67 according to IEC / EN 60529 standard
RkJQdWJsaXNoZXIy MzYzNzg=