435 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS Specification High Power Reference 481044 Coil Group 2.0 / 2.2 Class of insulation F 155°C Ambient temperature -40°C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) - P (cold) 20°C - AC Pn (holding) 14 W Attraction cold 56 VA (20 W) Weight 130 g Voltages "Un" VAC/Hz Code -10% to +10% of the Un 24/50 220/50 230/50 A2 A7 F4 COILS WITH SCREW TERMINALS HIGH POWER COILS 40 mm This coil can be mounted with every Parker Solenoid Valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. They can be mounted with all metal housings. The coil winding is completely encapsulated in synthetic material. Easy mounting in confined spaces. Electrical connection with screw terminals for wire up to 1.5 mm². Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive. To Order a Coil choose Coil Ref + Voltage Code, example: 481044 for 24VAC/50Hz = 481044A2 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. These coils must be used with suitable housings, see examples below: 2.0/2.2 COIL GROUP Ref. 4270 - Protection IP 44 according to IEC / EN 60529 standard (with cable gland) Ref. 4538 - Protection IP 67 according to IEC / EN 60529 standard
RkJQdWJsaXNoZXIy MzYzNzg=