432 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS Specification Coil with two 500 mm flying leads Reference 496081 Coil Group 2.0 / 2.1 Degree of protection IP67 according to IEC / EN 60529 standards Class of insulation F 155°C Ambient temperature -40 °C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) 9 W P (cold) 20°C - AC Pn (holding) 9 W Attraction cold 32 VA Weight 180 g Voltages "Un" VAC/Hz Code VDC Code -10% to +10% of Un for AC - 5 % to + 10 % for Un DC 24/50 - 24/60 110-115/50 - 120/60 220-240/50 - 240/60 P0 S5 S6 24 12 C2 C1 COILS WITH FLYING LEADS To Order a Coil: Coil Ref + Voltage Code, example: 496081 for 24 VDC = 496081C2 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. 2.0/2.1 COIL GROUP COIL 32 mm IP67 This coil can be mounted with every Parker solenoid valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. This is an encapsulated assembly comprising a coil, integral magnetic iron path and snap-on plug connection. The synthetic material encapsulation provides an effective compact housing, offering full protection against dust, oil, water, etc. Ease of mounting in confined space - offers shock and corrosion protection - simplifies conversion of existing equipment to other requirements, etc. Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive.
RkJQdWJsaXNoZXIy MzYzNzg=