431 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS COILS FOR DIN PLUG CONNECTION COIL FOR OIL AND GAS 37 mm Specification Coil for Oil and Gas Reference (with DIN plug) 496895 Coil group 10.1 Degree of protection IP65 according to IEC / EN 60529 standards Class of insulation H 180°C Electrical connection With DIN plug 492459 (AC) or 486586 (DC) Ambient temperature -40°C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) 8 W P (cold) 20°C - AC Pn (holding) 8 W Attraction cold - Weight 273 g Voltages "Un" VAC/Hz Code VDC Code -10% to +10% of the Un 230/50-60 110/50-60 P9 P2 24 C2 This coil can be mounted with every Parker solenoid valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. This is an encapsulated assembly comprising a coil, integral magnetic iron path and snap-on plug connection. The synthetic material encapsulation provides an effective compact housing, offering full protection against dust, oil, water, etc. Ease of mounting in confined space - offers shock and corrosion protection - simplifies conversion of existing equipment to other requirements, etc. Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive. DIN plug connector included (The AC electrical connection is delivered with a rectifier bridge). 10.1 COIL GROUP To Order a Coil choose Coil Ref + Voltage Code, example: 496895 for 24 VDC = 496895C2 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. The fixing nut (housing kit) is already inclued in the coil kit.
RkJQdWJsaXNoZXIy MzYzNzg=