428 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS COILS FOR DIN PLUG CONNECTION DOUBLE FREQUENCY COIL 22 mm These coils must be used with suitable housings, see example below: Please use the coil assembly kit Ref. 8993. It is composed of a nameplate giving details of the valve type, a round washer and a nut to ensure the fixing between 22 mm coil and the valve. This coil can be mounted with every Parker solenoid valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. This coil is designed for valves equipped with a miniature tube assembly (2000 series valves). This is an encapsulated assembly comprising a coil, integral magnetic iron path and snap-on plug connection. The synthetic material encapsulation provides an effective compact housing, offering full protection against dust, oil, water, etc. Ease of mounting in confined space - offers shock and corrosion protection - simplifies conversion of existing equipment to other requirements, etc. Coil conforms to the IEC/CENELEC safety standards and complies with European lowvoltage directive. DIN plug connector to be ordered separately (see coil accessories section). 1.1 COIL GROUP To Order a Coil choose Coil Ref + Voltage Code, example: 488143 for 200/50-60 = 488143P6 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. Specification Double frequency Reference (without DIN Plug) 488143 Coil group 1.1 Degree of protection IP65 according to IEC / EN 60529 standards (with DIN plug). Class of insulation F 155°C Electrical connection The coil is connected with a 2 P + E plug according to EN 175301-803 type B. Ambient temperature -40°C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) - P (cold) 20°C - AC Pn (holding) 2.5 W Attraction cold - Weight 60 g Voltages "Un" VAC/Hz Code -10% to +10% of the Un 200/50-60 P6
RkJQdWJsaXNoZXIy MzYzNzg=