423 COILS FOR DIN PLUG CONNECTION UL COIL 32 mm These coils can be mounted with every Parker solenoid valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. This is an encapsulated assembly comprising a coil, integral magnetic iron path and snap-on plug connection. The synthetic material encapsulation provides an effective compact housing, offering full protection against dust, oil, water, etc. Ease of mounting in confined space - offers shock and corrosion protection - simplifies conversion of existing equipment to other requirements, etc. Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive. Specification Coil for oil burner - UL recognized Reference (without DIN plug) 483764 Coil group 14.2 Degree of protection IP65 according to IEC / EN 60529 standards (with DIN plug). Class of insulation F 155°C Electrical connection With DIN 43650 A Plug Ambient temperature -40°C to 50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) - P (cold) 20°C - AC Pn (holding) 9 W Attraction cold - Weight 138 g Voltages "Un" VAC/Hz Code - 15% to +10% of the Un 240/50-60 110/50-115/60 230/50-240/60 Q1 Q9 T1 To Order a Coil choose Coil Ref + Voltage Code, example: 483764 for 240/50-60 = 483764Q1 More voltage possibilities can be found in the table of voltage codes at the end of the coil section. 14.2 COIL GROUP These coils must be used with suitable housings, see example below: Please use the coil assembly kit Ref. 2995. It is composed of a nameplate giving details of the valve type, a round washer and a nut to ensure the fixing between 32 mm coil and the valve. Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS
RkJQdWJsaXNoZXIy MzYzNzg=