420 Parker Hannifin Corporation Fluid Control Solutions Europe General Catalogue FCSE/0112/UK V2.2 07/2022 COILS COILS FOR DIN PLUG CONNECTION These coils must be used with suitable housings, see example below: Please use the coil assembly kit Ref. 2995. It is composed of a nameplate giving details of the valve type, a round washer and a nut to ensure the fixing between 32 mm coil and the valve. These coils can be mounted with every Parker solenoid valves corresponding to the specified Coil Group. See column "Coil Group" within valve pages. This is an encapsulated assembly comprising a coil, integral magnetic iron path and snap-on plug connection. The synthetic material encapsulation provides an effective compact housing, offering full protection against dust, oil, water, etc. Ease of mounting in confined space - offers shock and corrosion protection - simplifies conversion of existing equipment to other requirements, etc. Coils conform to the IEC/CENELEC safety standards and complies with European low-voltage directive. 3.0 COIL GROUP REDUCED POWER COIL 32 mm Specification Reduced power Ref. (without DIN plug) Ref. (with DIN plug) 482730 Coil Group 3.0 Degree of protection IP65 according to IEC / EN 60529 standards (with DIN plug). Class of insulation F 155°C Electrical connection The coil is connected with a 2 P + E plug according to EN 175301-803 type A Ambient temperature -40°C to +50°C The application is limited also by the temperature range of the valve. Elect. Power DC Pn (hot) 7 W P (cold) 20°C 9 W AC Pn (holding) 6 W Attraction cold 20 VA (7 W) Weight 130 g (without plug) Voltages "Un" VAC/Hz Code VDC Code -10% to +10% of the Un 220-230/50 3D 24 C2 To Order a Coil choose Coil Ref + Voltage Code, example: 482730 for 24 VDC = 482730C2 More voltage possibilities can be found in the table of voltage codes at the end of the coil section.
RkJQdWJsaXNoZXIy MzYzNzg=