82 www.parker.com/gsfe Breathable Quality Compressed Air BAS HL 050 – 085 Breathable Compressed Air Purifier Flow Rates Model Pipe Size BSPP or NPT Inlet Flow Rate L/s m3/min m3/hr cfm BAS HL 050 1/2" 15 0.92 55 32 BAS HL 055 1/2" 19 1.17 70 41 BAS HL 060 1/2" 25 1.50 90 53 BAS HL 065 1/2" 31 1.84 110 65 BAS HL 070 3/4" 42 2.51 150 88 BAS HL 075 1" 51 3.09 185 109 BAS HL 080 1" 61 3.67 220 129 BAS HL 085 11/2" 83 5.01 300 177 Performance Dryer Models Dewpoint (Standard) ISO8573-1:2010 Classification (Standard) °C °F BAS HL -40 -40 Class 1.2.0 Technical Data Dryer Models Minimum Operating Pressure Maximum Operating Pressure Minimum Operating Temperature Maximum Operating Temperature Maximum Ambient Temperature Electrical Supply (Standard) Electrical Supply (Optional) Electrical Supply (Optional)* Thread Type Noise Level bar g psi g bar g psi g °C °F °C °F °C °F dB(A) BAS HL 050 - 085 4 58 16 232 5 41 35 95 55 131 85 - 265V 1ph 50/60Hz 24V DC N/A BSPP or NPT <75 * Available for BAS HL 050 Only. CFOD - Correction Factor Dewpoint Maximum Inlet Temperature °C -40 °F -40 Correction Factor 1.00 CFIT - Correction Factor Maximum Inlet Temperature Maximum Inlet Temperature °C 25 30 35 °F 77 86 95 Correction Factor 1.00 1.00 1.00 CFAT - Correction Factor Maximum Ambient Temperature Maximum Ambient Temperature °C 25 30 35 40 45 50 °F 77 86 95 104 113 122 Correction Factor 1.00 1.00 1.00 1.00 1.00 1.00 CFMIP - Correction Factor Minimum Inlet Pressure Minimum Inlet Pressure barg 4 5 6 7 8 910111213141516 psi g 58 73 87 100 116 131 145 160 174 189 203 218 232 Correction Factor 1.60 1.33 1.14 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Product Selection & Correction Factors For correct operation, compressed air dryers must be sized using for the maximum (summer) inlet temperature, maximum (summer) ambient temperature, minimum inlet pressure, required outlet dewpoint and maximum flow rate of the installation. To select a dryer, first calculate the MTC (Minimum Treatment Capacity) using the formula below then select a dryer from the flow rate table above with a flow rate equal to or above the MTC. Minimum Treatment Capacity = System Flow x CFIT x CFAT x CFMIP x CFOD Stated flows are for operation at 7 bar (g) (102 psi g) with reference to 20°C, 1 bar (a), 0% relative water vapour pressure. For flows at other pressures, apply the correction factors shown below.
RkJQdWJsaXNoZXIy MTQ4NTgyMQ==